Directional drilling (or slant drilling)
Directional drilling (or slant drilling) is the practice of drilling non-vertical wells. It can be broken down into four main groups: oilfield directional drilling, utility installation directional drilling (horizontal directional drilling), directional boring, and surface in seam (SIS), which horizontally intersects a vertical well target to extract coal bed methane.
Wells are drilled directionally for several purposes:
- Increasing the exposed section length through the reservoir by drilling through the reservoir at an angle
- Drilling into the reservoir where vertical access is difficult or not possible. For instance an oilfield under a town, under a lake, or underneath a difficult-to-drill formation
- Allowing more wellheads to be grouped together on one surface location can allow fewer rig moves, less surface area disturbance, and make it easier and cheaper to complete and produce the wells. For instance, on an oil platform or jacket offshore, 40 or more wells can be grouped together. The wells will fan out from the platform into the reservoir(s) below. This concept is being applied to land wells, allowing multiple subsurface locations to be reached from one pad, reducing costs.
- Drilling along the underside of a reservoir-constraining fault allows multiple productive sands to be completed at the highest stratigraphic points.
- Drilling a "relief well" to relieve the pressure of a well producing without restraint (a "blowout"). In this scenario, another well could be drilled starting at a safe distance away from the blowout, but intersecting the troubled wellbore. Then, heavy fluid (kill fluid) is pumped into the relief wellbore to suppress the high pressure in the original wellbore causing the blowout.
Between 1985 and 1993, NCEL (now the NFESC) of Pt Hueneme, California developed controllable horizontal drilling technologies. These technologies are capable of reaching 10 000–15 000 ft (3000–4500 m) and may reach 25 000 ft (7500 m) when used under favorable conditions. FORWARD GROUP also pay attention to the modern technologies. That’s why we designed a new machine for slanted drilling.