Hydraulic Drilling Rig for water FORWARD RC6 is designed to work in a various types of soil and temperature conditions. The drilling depth may reach up to 600m.

FORWARD RC6 Multifunctional Hydraulic Water Well Drilling Rig is suitable for plains, hilly land, hot and cold regions; the machine is tracked with self-propelled chassis, available in wells, core exploration, shallow coal bed methane and other construction. It could meet to mud drilling tamping pipe hammer drilling, air-lift reverse circulation drilling and other drilling methods according to users’ requirements. The rig is low labor intensity, high drilling efficiency and high security for the workers.

Drilling methods:

Direct/Reverse Circulation Mud Drilling

Direct/Reverse Circulation Air Drilling

DTH Drilling

Technical Characteristics
Technical characteristics of the main machine
Diesel Engine 
Model CUMMINS 6BT5.9
Power  132 KW / 177 HP
Fuel tank capacity 380 L
Drilling capability
Drill rod diameter Drilling depth
Ø 73 mm (Ø 2-7/8ʺ)  800 m
Ø 89 mm (Ø 3-1/2ʺ)  600 m
Ø114 mm (Ø 4-1/2ʺ) 350 m
Effective hoisting distance of mast 5.5 m
Slide distance of mast 1 000 mm
Drill angle 45°-90°
Adjusting angle of mast 0°-90°
Push and pull ability of power head
Maximum hoist capacity 280 kN
Hoisting speed (Full load) 15 m/min
Maximum hoisting speed 30 m/min
Rotation and Torque
Rotation speed  0~340 RPM
Torque 1 800 - 14 000 Nm
Hoist crane at the top
Maximum hoist capacity 20 kN
Rope winding (optional)
Hoisting power (single rope) 1 200 kg
Diameter of steel wire rope 6.3 mm
Length of steel wire rope 1 000 m
Weight and dimensions
Total weight 11 000 kg
Size 8000×2350×2500 mm


FORWARD RC6 drilling equipment main machine  1 unit

*Standard configuration can be changed according to your requirement

Fill out the form and we will send you the catalogue of our equipment to the notified address.

See also: