LS584-D Hi-G dryer
KOSUN Hi-G Dryer is used for drainage and processing of drill cuttings, it can reduce the water ratio in drill cuttings to below 10%, thereby significantly reducing the costs for further waste processing.
Use of Drying Shaker
Hi-G Dryer (Drying Shaker) is used to recover the mud from drilling cuttings, so as to reduce the liquid/oil content in drilling cuttings to as low as about 10%(w/w) and recover part of the drilling mud, so that the drilling cost can be reduced and the drilling waste volume can be cut down, for the purpose of reducing environmental pollution.
Features and Advantages:
- High G-force vibration intensity (adjustable as per working conditions);
- Make drilling cuttings more dryer;
- Weir type feed box is more applicable to on-site process;
- Fast drilling cuttings conveying speed and high handling capacity;
- Screen frame tilt angle can be adjusted from -1° to 5°;
- Rapid screen tensioning system ensures easy screen replacement.
Technical specifications
Model |
LS584-D |
Type |
Linear |
G-force |
7.3 G (Adjustable) |
Capacity |
600-750GPM |
AWD |
-1°~+5° |
Total screen area (m³)/(ft²) |
2.7/29 |
Power (kW/HP) |
2*2.5 |
Number of screen panels |
4 panels |
Height of feed port (mm/in) |
1171/46 |
Capacity of integrated base collecting box (m³) |
1.5 |
Dimensions (mm/in) |
2752*1892*1762/108*74*69 |
Weight (kg/lbs) |
1590/3506 |